Setting up GRUB to boot from both disks of mirrored RAID

copy/paste from:

Many people use mirrored RAID (also known as 'RAID 1') to protect themselves against data loss caused by hard disk failure. Sometimes, you even want GRUB to boot from the secondary hard disk in case the primary fails to keep the system up and running. This is however not as easy as one might think...

GRUB keeps track of the hard disks currently available on your system, on most distributions you can find this information in /boot/grub/ You might have a file like this:

hopper:~# cat /boot/grub/
(hd0) /dev/sda
(hd1) /dev/sdb

Of course you can install GRUB to /dev/sdb (which is hd1), but obviously GRUB will be confused if /dev/sda fails and hd1 becomes hd0. Most likely, it will complain about a failing hard disk at boot time:

GRUB Hard Disk Error

In this case, you want to install GRUB to /dev/sdb and have sdb also mapped to hd0:

hopper:~# cat /boot/grub/
(hd0) /dev/sda
(hd0) /dev/sdb
hopper:~# grub-install /dev/sdb
The drive (hd0) is defined multiple times in the device map /boot/grub/

GRUB doesn't accept this duplicate definition (which is indeed incorrect), so you need to configure things by hand:

hopper:~# grub
grub> device (hd0) /dev/sdb
grub> root (hd0,0)
Filesystem type is ext2fs, partition type 0xfd

grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... 15 sectors are embedded.
Running "install /boot/grub/stage1 (hd0) (hd0)1+15 p (hd0,0)/boot/grub/stage2 /boot/grub/menu.lst"... succeeded

grub> quit

Now, /dev/sda and /dev/sdb are configured as hd0 and the system remains bootable if /dev/sda fails.

Assumptions about partitions

The above information only works if your boot filesystem can be found on both /dev/sda1 and /dev/sdb1. If you have /boot on e.g. /dev/sda5 and /dev/sdb5, you'll have to replace root (hd0,0) with something more applicable for your specific configuration.


Trackback specific URI for this entry

This link is not meant to be clicked. It contains the trackback URI for this entry. You can use this URI to send ping- & trackbacks from your own blog to this entry. To copy the link, right click and select "Copy Shortcut" in Internet Explorer or "Copy Link Location" in Mozilla.

No Trackbacks


Display comments as Linear | Threaded

No comments

Add Comment

You can use [geshi lang=lang_name [,ln={y|n}]][/geshi] tags to embed source code snippets.
Enclosing asterisks marks text as bold (*word*), underscore are made via _word_.
Standard emoticons like :-) and ;-) are converted to images.
E-Mail addresses will not be displayed and will only be used for E-Mail notifications.
To leave a comment you must approve it via e-mail, which will be sent to your address after submission.

To prevent automated Bots from commentspamming, please enter the string you see in the image below in the appropriate input box. Your comment will only be submitted if the strings match. Please ensure that your browser supports and accepts cookies, or your comment cannot be verified correctly.